0X13
Abstract: 0x40 0b10000000 0B11000000
Text: The application code of PWM function. IOC9 = 0X9 IOCA = 0XA R10 = 0X10 ;PWM COUNTER R11 = 0X11 ;PWM COUNTER R12 = 0X12 ;TEMP R13 = 0X13 ;TEMP R14 = 0X14 ;TEMP ERE = 0XE ORG 0X000 INITIAL: MOV A,@0B11001000 ;SELECT EXTRA RAM IOW IOCA CLRA IOW IOC9 CLR R10
|
Original
|
0X000
0B11001000
0X13
0x40
0b10000000
0B11000000
|
PDF
|
eMIOS channel is set up to drive the eTPU
Abstract: MPC5554 AN2851 AN2864 MPC5500 emios timebase IC mpc5554 emios MPC5554 Memory UINT32
Text: Freescale Semiconductor Application Note Using the eTPU Input Capture Function by: David Paterson MCD Applications EKB This eTPU Input Capture IC application note provides simple C routines to interface to the IC eTPU function. These routines can be used on any product that has an
|
Original
|
MPC5554
AN2864,
eMIOS channel is set up to drive the eTPU
AN2851
AN2864
MPC5500
emios
timebase IC
mpc5554 emios
MPC5554 Memory
UINT32
|
PDF
|
D3318
Abstract: No abstract text available
Text: 8101/8104 Gigabit Ethernet Controller Technical Manual November 2000 Order Number R14017.A This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation.
|
Original
|
R14017
DB14-000123-01,
D-33181
D3318
|
PDF
|
RXD29
Abstract: D3318 216520-4 8B10B ansi encoder
Text: 8101/8104 Gigabit Ethernet Controller Technical Manual February 2001 Order Number R14017.A This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation.
|
Original
|
R14017
DB14-000123-02,
D-33181
RXD29
D3318
216520-4
8B10B ansi encoder
|
PDF
|
xPC56XX EVB
Abstract: crank angle position sensors xPC56XX rev b xPC56XX rev c AN3769 crank sensor AN2864 MPC5534 MPC5553 MPC5565
Text: Document Number: AN3769 Rev. 0, 06/2009 Using the Engine Position CRANK and CAM eTPU Functions by: Geoff Emerson East Kilbride 1 Introduction This application note describes simple C interface functions to CRANK and CAM eTPU functions. These functions can be used
|
Original
|
AN3769
MPC5633M
AN2864
AN3769
MPC551x
MPC5533
MPC5534
MPC5553
MPC5554,
MPC5565,
xPC56XX EVB
crank angle position sensors
xPC56XX rev b
xPC56XX rev c
crank sensor
MPC5565
|
PDF
|
RXD28
Abstract: No abstract text available
Text: TECHNICAL MANUAL 8101/8104 Gigabit Ethernet Controller August 2001 This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation.
|
Original
|
DB14-000123-03,
RXD28
|
PDF
|
AN2851
Abstract: AN2864 eTPU capture IC link SPWM IC mpc5554 emios MPC5500 MPC5554 eMIOS channel is set up to drive the eTPU emios
Text: Freescale Semiconductor Application Note Document Number: AN2851 Rev. 0, 08/2007 Using the eTPU Input Capture Function by: David Paterson MCD Applications EKB This eTPU Input Capture IC application note provides simple C routines to interface to the IC eTPU function.
|
Original
|
AN2851
MPC5554
AN2864,
AN2851
AN2864
eTPU capture
IC link
SPWM IC
mpc5554 emios
MPC5500
eMIOS channel is set up to drive the eTPU
emios
|
PDF
|
sony R04
Abstract: 100BASE-FX 8B10B DA16 TX2 -RX2
Text: TECHNICAL MANUAL 8101/8104 Gigabit Ethernet Controller November 2001 This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation.
|
Original
|
DB14-000123-04,
sony R04
100BASE-FX
8B10B
DA16
TX2 -RX2
|
PDF
|