4046 application circuits
Abstract: SHD326271
Text: SHD326271 SHD326271P SHD326271N SHD326271D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4046, REV. A HERMETIC ULTRAFAST RECTIFIER SINGLE / DUAL - COM. CATHODE / COM. ANODE / DOUBLER DESCRIPTION: 200 VOLT, 16 AMP, 35 NS HERMETIC RECTIFIER IN A TO-257 PACKAGE.
|
Original
|
PDF
|
SHD326271
SHD326271P
SHD326271N
SHD326271D
O-257
4046 application circuits
|
4046
Abstract: 4046 DOWNLOAD DATASHEET
Text: CAMBION Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44 0 1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet 571-4046 Insulated solder terminal, Pin type Recommended mounting hole .136 (3,45)
|
Original
|
PDF
|
571-4046-XX-YY-19
4046
4046 DOWNLOAD DATASHEET
|
82064
Abstract: No abstract text available
Text: SPICE Device Model SiR890ADP Vishay Siliconix N-Channel 20-V D-S MOSFET CHARACTERISTICS • N-Channel Vertical DMOS • Macro Model (Subcircuit Model) • Level 3 MOS • Apply for both Linear and Switching Application • Accurate over the - 55 °C to 125 °C Temperature Range
|
Original
|
PDF
|
SiR890ADP
18-Jul-08
82064
|
ASTM-D-257
Abstract: FTMS-101C nema 24 Desco Industries ASTMD257
Text: Description: The premium choice for ESD bench dissipative worksurfaces. Provides a durable and attractive ESD controlled dissipative worksurface. Resists hot solder and most solvents; exceeds NEMA standards for wear resistance. Patented conductive layer provides superior charge dissipation and zero voltage suppression.
|
Original
|
PDF
|
TB-2091
ASTM-D-257
FTMS-101C
nema 24
Desco Industries
ASTMD257
|
10200
Abstract: No abstract text available
Text: Description: Micastat is a static dissipative high pressure thermoset amino resin laminate. It is designed to provide a path to ground and eliminate static charge generation when used as a worksurface. The surface resistance <1 x 109 ohms Rtg meets ANSI/ESD S20.20 worksurface required
|
Original
|
PDF
|
|
MIL-PRF-81705
Abstract: MILPRF-81705 1101-B
Text: Sizes on Page 2 3M Static Shielding Bag SCC 1500 Static Shielding Bag ~ Metal-Out 3M Metal-out Static Shielding Bags SCC 1500 are approved by major computer, electronics, and disk drive manufacturers for use worldwide. Our transparent, metallized static shield bag structure provides a static safe environment for sensitive
|
Original
|
PDF
|
MIL-PRF-81705
MILHDBK-263,
MIL-STD-1686,
1012ohms/square
1101-b
C866-722-3736
MILPRF-81705
1101-B
|
EIA 583
Abstract: MIL-PRF-81705 EIA-583 MILPRF-81705 2700TM Static Control Components MIL-PRF-817
Text: Sizes on Page 2 Dri-Shield 2700 TM Moisture Barrier Bag with Humidity Indicator Card and Desiccant Moisture Barrier Bag ~ Aluminized SCC’s Dri-Shield 2700 Moisture Barrier Bag is designed for dry packaging of electronic devices. Made from multiple layers of metallized polyester and heavy gauge
|
Original
|
PDF
|
MIL-PRF-81705
g/100
103-A
EIA 583
EIA-583
MILPRF-81705
2700TM
Static Control Components
MIL-PRF-817
|
MIL-PRF-81705 type i
Abstract: a1102a 81705 MIL-PRF-81705 EIA-583 MILPRF-81705 70068 EIA 583
Text: Sizes on Page 2 3M Dri-Shield Moisture Barrier Bag 2000 Moisture Barrier Bag with 3M™ Humidity ICard and D Moisture Barrier Bag ~ Aluminized 3M’s Dri-Shield 2000 Moisture Barrier Bag is designed for dry packaging of electronic devices and uses the first structure approved under MIL-PRF-81705 Type I.
|
Original
|
PDF
|
MIL-PRF-81705
g/100
1102-a
MIL-PRF-81705 type i
a1102a
81705
EIA-583
MILPRF-81705
70068
EIA 583
|
FTMS 101B
Abstract: RED OXIDE industrial grey oxide conductive paint
Text: TECHNICAL BULLETIN TB-2080 Statguard Conductive Acrylic Paint Application Instructions Made in America 1. The surface must be clean, dry, dull, and smooth. Heavy dirt or grease build-up should be removed with a stripper or degreaser. Cleaning methods range from: sweeping,
|
Original
|
PDF
|
TB-2080
FTMS 101B
RED OXIDE
industrial grey oxide
conductive paint
|
N E C D882
Abstract: MIL-STD-3010
Text: Sizes on Page 2 3MTM Metal-out Static Shielding Bag SCC 1500 ZipTop Reclosable Open Top Static Shielding Bag - Metal-out 3M SCC 1500 metal-out static shielding bags are approved by major electronics manufacturers for use worldwide. Our transparent, metallized static shield bag structure provides a static safe environment for sensitive electronic devices. This bag also provides
|
Original
|
PDF
|
1101-B
N E C D882
MIL-STD-3010
|
MIL-STD-3010
Abstract: ASTM d882 IPC s20.20 1161B
Text: Sizes on Page 2 3MTM Moisture Barrier Bag Dri-Shield 3400 Moisture Barrier Bag with humidity indicator card, desiccant, and label. Moisture Barrier Bag ~ Foil Dri-Shield 3400 Moisture Barrier Bag is made from a high barrier foil structure, and is designed for dry packaging of electronic devices. Bags protect SMD’s from moisture and
|
Original
|
PDF
|
J-STD-033,
1161-B
MIL-STD-3010
ASTM d882
IPC s20.20
1161B
|
P H D882
Abstract: ASTM 1249 ASTM d882 MIL-STD-3010 D2715
Text: Sizes on Page 2 3MTM Moisture Barrier Bag Dri-Shield 2700 Moisture Barrier Bag with Humidity Indicator Card and Desiccant Moisture Barrier Bag ~ Aluminized The 3M Dri-Shield 2700 Moisture Barrier Bag is designed for dry packaging of electronic devices. Made from multiple layers of metallized polyester and heavy gauge dissipative
|
Original
|
PDF
|
103-A
P H D882
ASTM 1249
ASTM d882
MIL-STD-3010
D2715
|
MIL-STD-3010
Abstract: D257 D882 S541 STM11 ASTM 1249 ASTM d882
Text: Sizes on Page 2 3MTM Moisture Barrier Bag Dri-Shield 2000 Moisture Barrier Bag ~ Aluminized Moisture Barrier Bag with Humidity Indicator Card and Desiccant The 3M Dri-Shield 2000 Moisture Barrier Bag is designed for dry packaging of electronic devices. Dri-Shield 2000 bags are made from multiple layers of metallized polyester and dissipative polyethylene. Bags protect SMD’s from moisture and static damage. Flexible structure is easy to vacuum
|
Original
|
PDF
|
102-A
MIL-STD-3010
D257
D882
S541
STM11
ASTM 1249
ASTM d882
|
MIL-STD-3010
Abstract: 3002424 D257 S541 STM11 ESD-S541 1011ohms
Text: 3MTM Static Shielding Bag SCC 1000 Sizes on Page 2 Open Top ZipTop Static Shielding Bag ~ Metal-In This transparent, metallized static shield bag provides a static safe environment for sensitive electronic devices. Four layer construction. Polyester dielectric and metal layer provide
|
Original
|
PDF
|
Shielding630
MIL-STD-3010
3002424
D257
S541
STM11
ESD-S541
1011ohms
|
|
TB-2083
Abstract: FED-STD-209C TB-2075
Text: TECHNICAL BULLETIN TB-2075 Reztore Topical Antistat Application Instructions Made in America Directions Surfaces: Apply Reztore™ Topical Antistat to the entire surface to be treated using either the pump or trigger spray bottle. Use a lint-free cloth to wipe the surface evenly.
|
Original
|
PDF
|
TB-2075
TB-2075
TB-2083
FED-STD-209C
|
STM97
Abstract: FTMS 101B emulsion paint vinyl tiles TB208 TR2020
Text: TECHNICAL BULLETIN TB-2088 Application Instructions Statguard Dissipative Floor Finish Made in America Statguard® Dissipative Floor Finish Meets ANSI/ESD S20.20 Table 3 of ANSI/ESD S20.20 lists the required limits for product qualification of ESD Flooring to be < 1 x 10E9
|
Original
|
PDF
|
TB-2088
STM97
HDBK-263A.
TB-2080.
TB-2088
FTMS 101B
emulsion paint
vinyl tiles
TB208
TR2020
|
FTMS 101B
Abstract: STM 97.2 STM 97.1 TB-2083 SA6524
Text: TECHNICAL BULLETIN TB-2088 Application Instructions Statguard Static Dissipative Floor Finish Made in America General Guidelines Statguard® and Statguard®-LH both eliminate triboelectric generated charges before costly damage can occur from personnel who approach static
|
Original
|
PDF
|
TB-2088
HDBK-263A.
TB-2080.
TB-2088
FTMS 101B
STM 97.2
STM 97.1
TB-2083
SA6524
|
TB-2032
Abstract: 030507MA105 Z871 TB208
Text: TECHNICAL BULLETIN TB-2032 Application Instructions Reztore Surface & Mat Cleaner Made in America Directions Smooth Surfaces: Apply Reztore™ Surface & Mat Cleaner to the entire surface to be treated using either the pump or trigger spray bottle. Use a lint-free cloth to wipe the surface until dry. For
|
Original
|
PDF
|
TB-2032
TB-2032
030507MA105
Z871
TB208
|
ASTM-F-150-72
Abstract: MIL-B-117 ASTM-D-991 FED-STD-101 ASTM-D991 Bipolar Static Induction Transistor cmos esd sensitivity MIL-M-55565 ASTM-D-257 SOAR-1
Text: R-FLOW ESD PROTECTION PROGRAM Linear Technology Corporation R-Flow Reliability has been a key focal point at Linear Technology Corporation LTC since its inception in 1981. Our standard product reliability is monitored closely and we have generated an extensive reliability database for both hermetic and plastic devices. This data is published on a
|
Original
|
PDF
|
MIL-STD-883
MIL-I-38534
MIL-M-55565
MIL-M-81705
FED-STD-101
EIA-625
ASTM-F-150-72
MIL-B-117
ASTM-D-991
FED-STD-101
ASTM-D991
Bipolar Static Induction Transistor
cmos esd sensitivity
MIL-M-55565
ASTM-D-257
SOAR-1
|
4046 application note pll
Abstract: MC14046 application MC14046 application note pll 4046 4046 application note vco PLL WITH VCO 4046 4046 vco ic 4046 pll 4046 IC circuit diagram ic 4046
Text: Using 60Hz Power Line Frequency as an Accurate Real Time Clock Timebase Application Note August 3, 2007 AN1342.0 Introduction Circuit Description See Figure 2 Real Time Clock (RTC) devices contain an oscillator and normally require a crystal to operate with the required
|
Original
|
PDF
|
AN1342
20ppm
100ppm
4046 application note pll
MC14046 application
MC14046
application note pll 4046
4046 application note vco
PLL WITH VCO 4046
4046 vco
ic 4046 pll
4046 IC circuit diagram
ic 4046
|
ca3130 replacement
Abstract: CD4046 equivalent CD4016 equivalent CD4046 OP05 equivalent rca ca3020 lm1488 CA3558 RCA CA3100 CMP-01
Text: MANUFACTURER Motorola continued National Semiconductor PART NUM BER H A R R IS E Q U IV A L E N T N O TES MC 1545/1445 HA-2400/2405 C3 M C I 554/1454 HA-2630/2635 C3 MC1556/1456 HA-2600/2605 B2 M C I 558/1458 HA-2650/2655 A2 M C 1582L H D -245 C2 M C 1583L
|
OCR Scan
|
PDF
|
HA-2400/2405
MC1554/1454
HA-2630/2635
HA-2600/2605
MC1558/1458
HA-2650/2655
MC1582L
HD-245
MC1583L
HD-246
ca3130 replacement
CD4046 equivalent
CD4016 equivalent
CD4046
OP05 equivalent
rca ca3020
lm1488
CA3558
RCA CA3100
CMP-01
|
Untitled
Abstract: No abstract text available
Text: Catalog 1307612 Revised 7-01 Flexible Film Products .100 [2.54] Centerline Round Wire Contacts, Continuous Strip and Loose Piece Material and Finish: Phosphor bronze; selectively gold plated, or plated bright tin-lead on entire contact See chart below. Related Product Data:
|
OCR Scan
|
PDF
|
|
cathode ray
Abstract: Scans-001781
Text: PHILIPS DH 13-76 DN 13-76 High standard, tight tolerance CATHODE RAY TUBE, featuring a flat face plate with a diameter of 13 cm 5" , post deflection acceleration by means of a helical electrode, side contacts and very high sensitivity TUBE À RAYONS CATHODIQUES de haute qualité et à petites
|
OCR Scan
|
PDF
|
DH13-76
DN13-76
cathode ray
Scans-001781
|
disadvantages of monostable multivibrator
Abstract: how to bistable multivibrator work 4046 application note pll Analog-Digital Conversion Handbook AD654 asynchronous VFC application note pll 4046 Gardner AD537 AN-361
Text: ANALOG ► DEVICES AN-361 APPLICATION NOTE ONE TECHNOLOGY WAY • P.O. BOX 9106 • NORWOOD, MASSACHUSETTS 02062-9106 • 617/329-4700 Ask the Applications Engineer — 3 by James Bryant V /F CONVERTERS Q. How do I send an analog signal a long distance without losing
|
OCR Scan
|
PDF
|
AN-361
disadvantages of monostable multivibrator
how to bistable multivibrator work
4046 application note pll
Analog-Digital Conversion Handbook
AD654
asynchronous VFC
application note pll 4046
Gardner
AD537
AN-361
|